rng process size change
[gnuk/neug.git] / ChangeLog
index daf46ab..f3d87ef 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,144 @@
+2016-06-15  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/neug.ld.in (__process2_stack_size__): Smaller value.
+
+2016-06-14  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/neug.ld.in (__process3_stack_size__): Larger value.
+
+       * fraucheky: Update to 0.4.
+
+       * src/main.c (usb_ctrl_write_finish): Support
+       MSC_MASS_STORAGE_RESET_COMMAND.
+
+       * tool/neug_check.py (main): "Board" is optional.
+       Reported by Kenji Rikitake.
+
+       * src/configure: Fix use_sys3 variable substitution.
+
+2016-06-13  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/main.c: Update with new USB API.
+
+2016-06-01  NIIBE Yutaka  <gniibe@fsij.org>
+
+       * tool/neug_upgrade.py (regnual.__init__): Don't call
+       setAltInterface since we have no alternative.
+
+2016-05-31  NIIBE Yutaka  <gniibe@fsij.org>
+
+       * src/main.c (main): Don't call fraucheky_main until configured.
+
+       * chopstx: Update to 0.12.
+
+       * src/main.c (usb_cb_get_descriptor): sys_board_name is only
+       available in newer SYS.
+
+2016-05-30  NIIBE Yutaka  <gniibe@fsij.org>
+
+       * src/main.c (usb_cb_tx_done, usb_cb_rx_ready): Fix for Fraucheky.
+
+       * fraucheky: Update.
+
+       * chopstx: Update.
+
+       * src/stm32f103.h, src/usb_stm32f103.c: Remove.
+       * src/adc_stm32f103.c, src/aes-constant-ft.c: Remove
+       * src/sys.c, src/sys.h: Remove.
+       * neug.ld.in, Makefile.in: Use SYS, USB, ADC in Chopstx.
+
+2016-05-27  NIIBE Yutaka  <gniibe@fsij.org>
+
+       * src/adc_stm32f103.c (adc_intr): Define in this module.
+       (adc_init): Claim IRQ here.
+       (adc_wait_completion): Don't expose INTR.
+
+       * src/neug.c (INTR_REQ_DMA1_Channel1): Remove.
+       (rng): Follow the change of ADC API.
+
+2016-05-26  NIIBE Yutaka  <gniibe@fsij.org>
+
+       * chopstx: Update.
+       * src/adc.h: Update from Gnuk.
+       * src/neug.c: Update from Gnuk.
+       * src/usb_stm32f103.c: Update from Chopstx.
+       * src/usb_lld.h: Update from Chopstx.
+       * src/sys.c: Update from Chopstx.
+       * src/configure: Follow the change of USB API.
+       * src/main.c (usb_cb_device_reset, usb_cb_ctrl_write_finish)
+       (vcom_port_data_setup, usb_cb_setup, usb_cb_get_descriptor)
+       (usb_cb_interface, usb_intr): Follow the change of USB API.
+       (VCOM_FEATURE_BUS_POWERED): New.
+       (usb_cb_handle_event): Clean up.
+       (usb_cb_tx_done, usb_cb_rx_ready): New.
+       (main): Use chopstx_poll.
+
+2016-02-05   Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/configure: Add submodule check suggested by Elliott
+       Mitchell.
+
+2015-09-18  Niibe Yutaka  <gniibe@fsij.org>
+
+       * VERSION: 1.0.4.
+
+2015-09-15  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/neug.ld.in (__main_stack_size__): Decrease stack size of
+       exception handlers.
+       (__process0_stack_size__): Decrease stack size of main.
+       (__process1_stack_size__): Decrease stack size of led.
+       (__process2_stack_size__): Increase stack size of rng.
+
+       * src/main.c (usb_cb_device_reset): Stop the interface.
+
+       * chopstx: Update to 0.10.
+
+       * src/usb_stm32f103.c: Update from Gnuk.
+
+2015-09-11  Niibe Yutaka  <gniibe@fsij.org>
+
+       * tool/neug_upgrade.py (main): Loop until finding reGNUal device.
+
+2015-09-08  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/adc_stm32f103.c (get_adc_config): Add
+       BOARD_ID_NITROKEY_START.
+
+       * src/sys.h: Update from Chopstx.
+
+2015-09-04  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/main.c (usb_cb_device_reset): Fix bDeviceState on reset.
+
+2015-09-02  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/main.c (CDC_CTRL_DTR): New.
+       (usb_cb_ctrl_write_finish): Distinguish DTR accurately.
+       (usb_cb_device_reset): Notify upper layer.
+
+2015-08-03  Niibe Yutaka  <gniibe@fsij.org>
+
+       * VERSION: 1.0.3.
+
+       * tool/neug_upgrade.py (neug.download, neug.execute)
+       (regnual.download): Python3 fix.
+
+       * tool/neug_check.py (main): Python3 fix.
+
+2015-07-31  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/configure (output_vendor_product_serial_strings): Fix sed
+       script when string is short.  Remove empty line.
+       * fraucheky: Update to 0.3.
+       * chopstx: Update to 0.08.
+
+2015-07-30  Niibe Yutaka  <gniibe@fsij.org>
+
+       * src/sys.h (BOARD_ID_ST_NUCLEO_F103, BOARD_ID_ST_DONGLE): New.
+       * src/adc_stm32f103.c (get_adc_config): Add ST Dongle and ST
+       Nucleo support.
+
 2015-07-28  Niibe Yutaka  <gniibe@fsij.org>
 
        * src/usb_stm32f103.c: Update from Gnuk.
 2015-07-28  Niibe Yutaka  <gniibe@fsij.org>
 
        * src/usb_stm32f103.c: Update from Gnuk.
        * src/main.c (usb_cb_ctrl_write_finish, vcom_port_data_setup)
        (usb_cb_setup, usb_cb_get_descriptor, usb_cb_interface): Follow
        the API change of USB driver.
        * src/main.c (usb_cb_ctrl_write_finish, vcom_port_data_setup)
        (usb_cb_setup, usb_cb_get_descriptor, usb_cb_interface): Follow
        the API change of USB driver.
+       (FSIJ_DEVICE_NEUG_FRAUCHEKY_REQUESTED): New.
+       (NEUG_SPECIAL_BITRATE): New.
+       (usb_cb_ctrl_write_finish, main): Special bitrate to invoke
+       Fraucheky manually.
 
 2015-07-23  Niibe Yutaka  <gniibe@fsij.org>
 
 
 2015-07-23  Niibe Yutaka  <gniibe@fsij.org>